This Nano glider is a super light and super nimble flyer. Super easy to fly, it is a unique glider experience that is sure to make this one your favorite gliders that you keep in the car to fly anywhere anytime and even in almost zero wind conditions. Slope fly off a wall, a car, a tree, a bump on the ground (ok maybe the last one wouldn't work) or anywhere you find even the smallest amount of lift.

Or throw on a small IPS motor with a couple zip ties and you have yourself a "Nano-Stick" that flies like the popular GWS Slow Stick but on a much smaller scale. Plenty of power using a GWS IPS motor direct drive spinning a 3x2 prop. Upgrade with a 12mm Feigao or AON Electrics IPS brushless motor for a real show.

Included:
* Wire for elevator push-rod and aileron push-rods
* 3 Nylon Micro Control Horns
* Carbon fiber Stick fuselage and Carbon fiber wing spar
* Simple photo step by step instructions for all assembly included
* All Depron 2mm parts with Airfoil on main wing pre-molded

You will need the following items to get flying:
* Foam Safe CA glue (UFO Brand CA glue highly recommended- User Friendly Odorless-)
* 2 Bluebird 3.7 g micro Servos
* 1 cell 150 mah up to 450 mah lipo battery pack or 4 cell NiCad or NiMH pack.
* Lead or other dense metal used for nose weight to balance the glider
* Scotch tape for aileron hinges and elevator hinge
* 4 Ch micro receiver + Crystal

Wing Span: 27 inches
Length: 20 inches
Ready to Fly Weight: 2.5 oz with 1 cell lipo 450 mah battery pack

100% satisfaction Guaranteed, If there is something wrong with your kit, We will fix it!

Click here for movie clip Nano-Glider Movie Clip at Santa Monica Beach / Click here for dail-up Internet connections
Nano-Glider Movie Clip Hand-Launched in Very Light Wind / Click here for dail-up Internet connections
Click here for a customer movie clip http://www.youtube.com/watch?v=WY4w_p1_6Sg
Click here for more movie clips Nanoplanes Movie Gallery
Click here for Build Log on RCGROUPS