GH Micro Jet V3 Brushless Outrunner 2200kv Perfect for a fast Nanoshark
Micro Parkjet SPEED 400 size Brushless Motor
The motor features a 3.17mm hardened steel shaft, dual ball bearings,
and has 3.5mm gold spring male connectors already attached and includes
3 female connectors for your speed control. Mounting holes have 16mm
and 19mm spacing on centers and are tapped for 3mm (M3) screws.
Spe
cifications:
Ni-Mh Battery:8 - 10 cells
Li-Po Battery: 2 / 3 cells
RPM per volt : 2200
Poles: 14
No Load Current / 10V: 2.05A
Max Current: 30A/60 sec
Dimension: 27.5x26
Shaft: 3.17mm
Weight: 34g
Recommended Max Propeller: 6x4 (See the Chart )
Recommended Model Weight: 200 - 500g (7oz to 22oz)
Click to enlarge motor performance chart
$54.99
MicroDAN 2505-2900Kv Perfect for the balsa Babyshark on 3s or 4s(100+ mph!)
This motor was developed using 10 magnet poles in order to improve
the compatibility with ESC's running on 4s, It is easier for many ESC's
to run a 10 magnet motor on 4s due to the lower switching frequency.
10 turn, 23AWG, DLRK, Delta, 10 magnets.
Specifications:
Weight: 36g including mount
RPM: 29300
KV: 2900
Shaft diameter 3mm prop adapter not included
Rm: N/A
Best prop: MAS G/F 6x4
Max amp: 38A
MicroDAN 2505 "Velocity" 4200Kv Perfect for the balsa Babyshark on 3s only (100+ mph!)
The MicroDAN 2505 "Velocity" 4200Kv motor is a racing motor designed for models like the Projeti and is not recommended for beginners. This motor is an ultra high speed motor and should only be used by pilots who have experience with high power very fast aircraft.
Please be very careful! motors at this power level can be extremely dangerous.
Expect speeds near 130 MPH in the projeti with APC 4.1 x 4.1 prop on 3s, 45A, 477W.
Specifications:
Stator Width: 25mm
Stator Height: 5mm
Stator Poles: 12
Magnet Poles: 8
Shaft Diameter 3mm prop adapter not included
Weight: 34 grams
no load RPM 42550 @ 9.99V
no load current 3.58A @ 9.99V
winding is 8 turns per tooth 22AWG ABC terminated delta
Recommended Prop: APC 4.1 x 4.1 (3s) requires prop adapter for 3mm shaft
Recommended Batteries: 2300 - 3000 20C mAH
Recommended ESC Dualsky 60A
This motor will destroy inexpensive speed controllers so experiment at your own risk.
Please note that you will need to use high temperature solder and pay very close attention to detail in your connections and component placement due to the extreme power levels this motor is capable of.
Static testing with Recommended Dualsy 60A ESC and APC 4.1 x 4.1E prop:
35000 RPM
135mph pitch speed
11.6V
45A
22 oz thrust
Static testing with Recommended Dualsy 60A ESC and APC 4.75 x 4.25E prop:
29500RPM
118mph pitch speed
10.5V
53A
Dualsky ESC Setting:
Brake - off
Cutoff mode - cutoff
Start mode - Soft start
Timing mode - High
Governor mode - Off
$14.99
TURNIGY 2204-14T 19g Outrunner 1450kv Perfect for the 28" sbach 3mm 3d plane
An excellent motor for planes up to 220 grams (8 oz) using 2 li-poly cells.
Very lightweight at 19 grams including, with an integrated prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and firewall mount inbuilt. Great for small 3D planes weighing around 6 oz, or aerobatic planes up to 8 oz.
Use with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range.
The motor features a 3mm hardened steel shaft, dual ball bearings, integrated prop saver.
Specifications:
Model: A2204-14
Cells: 2-3
Kv: 1450rpm/V
Maxx Eff: 74%
No load Curr. .3A
Max Current: 7.5A
Weight: 19g
Int. Resistance: 550mh
Dimensions: 27.6 x 11.5mm
Recomended Model: (3D 220g or less)
Recomended prop: 8040/2S or 7035/3S
This is similar to the AXi 2203/52 or 2204/54
Use a 10A ESC with this motor.
$29.99
$23.99
NTM 35-30A 1400kv / 560w
with accessory pack Perfect for the 38" sbach 9/6mm 3d plane (power set up)
The NTM range of motors are built for budget conscious customers while still using quality bearings and correctly rated magnets.
Specifications:
Model: NTM Series 35-30A 1400kv
Kv: 1400rpm/v
Turns: 5
Max current: 41A
Max Power: 420W @ 12v (3S) / 560W @ 15v (4S)
Shaft: 4mm
Weight: 88.3g
ESC: 50A
Cell count: 3s~4s Lipoly
Front Mounting Hole Distance: 25mm or 19mm
Connection: 3.5mm Bullet-connector
Recommended Prop: 10x4.7
$29.99
$23.99
NTM 35-30 1100kv / 380w with accessory pack Perfect for the 38" sbach 9/6mm 3d plane (power set up)
NTM motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings, tool-steel shafts plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Specifications:
Model: NTM Series 35-30 1100kv
Kv: 1100rpm/v
Max current: 32A
Max Power: 350W @ 12v (3S) / 380 @ 15v (4S)
Shaft: 4mm
Weight: 88g
ESC: 40
Cell count: 3s~4s Lipoly
Front Mounting Hole Distance: 19mm or 16mm
Connection: 3.5mm Bullet-connector
hexTronik 24gram Brushless Outrunner 3000kv Perfect for the Babyshark
Specifications:
Brushless Outrunner Motor.
Kv - 3000rpm/v
Load [no prop]: 1.2a / 7.4v @ 21500rpm (0g thrust)
Load [7x4 prop]: 21A / 7.4v @ 8800rpm (380g thrust)
Load [8x3.8 prop]: 22A / 7.4v @ 8200rpm (430g thrust)
*Motor comes with prop saver and mount.
*This motor may come in either blue or silver.
*Data provided by a customer on Hobbyking website.
4,1x4,1 2s/9,28A/70W 3s/17A/189W
4,5x4,1 2s/11A/84W 3s/20A/225W
4,5x4,5 2s/12A/93W 3s/22A/238W
4,7x4,25 2s/12A/89W 3s/22A/241W
4,75x4,75 2s/13,6A/102W 3s/24A/262W
4,75x5,50 2s/15,8A/116W
5x5 2s/14,8A/110W
5x5 Large 2s/16,7A/122W
5,1x4,5 Large 2s/17,8A/130W
5,25x4,75 2s/17A/124W
5,25x6,25 2s/20,7A/148W
5,5x4,5 2s/16,7A/122W
6x4 2s/20A/156W
6x5 2s/19A/150W
6x5,5 2s/23A/180W
$15.99
Out of Stock
Turnigy 2730 Brushless Motor 3000kv
Perfect for the Babyshark
Specifications:
Weight: 25g (kv3000) (not including connectors)
Diameter of shaft: 3mm
Length of front shaft: 10mm
Lamination thickness: .2mm
Magnet type: 45SH
Thrust: 320~410g
Prop: 5x3~6x3
ESC: 12A
Max Current: 8.5~11A
Battery Type: 2S Only
NOTE: Although the manufacturer specifications show to use only 2S, we have tested this motor the same as the HXT 2730-3000kv motor. You can use it on the Babyshark running a 3S Lipo with a Mystery 30Amp esc + 4.75x4.75 prop.
$27.99
tiger motor at2204-21
Specifications:
Kv: 1850
Configu-ration: 12N14P
Stator Diameter: 22mm
Stator Length: 4mm
Shaft Diameter: 3mm
Motor Dimension: 27x21mm
Weight (g): 19.5
Idle Current(10)@10v(A): 0.2
No. of Cells(Lipo): 1-2S
Max Continuous Current(A)180S: 9.5A
Max Continuous Power(W)180S: 72W
Max Efficiency Current: (2.5-8A)>78%
Internal Resistance: 258m
